Kenwood KA-601 DC Integrated Amplifier

Kenwood say...

60 watts per channel min RMS both channels driven at 8 ohms, 20 Hz - 20 kHz with less than 0.02% total harmonic distortion.

'HI-SPEED' amplifier for faster transient response for unprecedented musical clarity and crispness
DC design for clear bass reproduction without phase distortion.

Dual power supplies to eliminate crosstalk distortion
Noise-free phono section: 93 dB signal-to-noise ratio (5 mV input). DC coupled switch and tone defeat.

Inputs/Controls
Phono 1&2, Tuner, Aux,Tape 1&2, Speakers A, B A&B, Headphone Jack.
Stereo/Mono/Reverse, Bass, Treble, Tone On/Off, Loudness 3db 6 db @ 50Hz, Balance, Attenuator/Mute -20db, Tape Source/Mon.

Specs

Power Amp Section
Min. Power Output, both channels driven
at 8 ohms, 20 Hz - 20 kHz with Total Harmonic
Distortion no more than 60 Watts
0.02%
Rise Time 0.9 uS
Slew Rate +/-110 V/uS IM Distortion (at rated power) 0.004%
Damping Factor 100 (DC - 20 kHz)

Pre Amp Section
Input Sens
Max. Input
Signal-to-Noise
PHONO 1(MM) 5.0 mV/220 mV/93 dB
PHONO 2(MM) 5.0 mV/220 mV/93 dB
TUNER 200 mV/--/105 dB
AUX 200 mV/--/105 dB
TAPE 200 mV/--/105 dB
Phono Freq. Response RIAA curve +/-0.3 dB
General
Inputs and Outputs 2 PHONOS; TUNER; AUX;
2 Tape; 2 Spkrs; Phones

44cm W x 42cm D x 15cm H. 12Kg.

Price $550.00 AUD    contact us by email